Bayer MaterialScience NAFTA


	News

	Events

	Newsletters

	Frequently Asked Questions

	Bayer Global
	Bayer US
	Bayer MaterialScience Global
	Sheffield Plastics
	BayerONE eBusiness
	BayCare Online
	Bayer Jobs



	General Conditions of Use Privacy Statement Imprint

For Immediate Release

Bayer MaterialScience LLC develops & tests UVA-curable coatings for aircraft topcoats

June 15, 2010

Pittsburgh, June 15, 2010 — Ultraviolet A (UVA)-curable coatings are being researched as an alternative to traditional two-component (2K) polyurethane aerospace topcoats because of their rapid cure rates, low volatile organic compounds (VOCs), low volatile hazardous air pollutants (VHAPs) and high performance properties.

Bayer MaterialScience LLC and Deft Inc., one of the leading suppliers of coating systems for the aerospace and industrial markets, developed UVA-curable coating formulations that were evaluated against aerospace standards for topcoats. Based on these findings, Todd Williams, industrial post-doctoral researcher, Bayer MaterialScience LLC, presented "Development of UVA-Curable Coatings for Aircraft Topcoats" at the recent RadTech's UV/EB 2010 Technology Expo and Conference in Baltimore.

Conventional coatings in the aerospace market historically have been based upon 2K polyurethane coatings that require 72 hours to fully develop their physical properties. The development of UVA-curable aerospace coatings is targeted to significantly decrease refurbishing time through greatly reduced curing time.

According to Williams, UVA-curable coating formulations display promising physical properties. A UVA-curable formulation was applied to C-130 and F-16 aircraft as a stencil coating and was periodically evaluated for color change and gloss retention. After 600 flying hours, the stencil coatings on the C-130 had ?E values comparable to the conventional polyurethane fluoropolymer coatings.

Aerospace coatings require a compromise of both chemical resistance and flexibility while maintaining hardness. In this study, formulations that yielded such a balance of chemical resistance, flexibility, and hardness were obtained using a combination of hard and soft urethane oligomers and reactive diluents.

Williams explained, "Gloss reduction of these coatings was achieved through a combination of flatteners and oxygen inhibition, leading to flexible, low gloss formulations." He continued, "Weathering of UVA aerospace systems is another critical property that can be chiefly controlled by raw material selection." Through this evaluation, the overall performance of UVA-curable coatings has been shown to rival that of conventional polyurethane coatings.

Bayer MaterialScience LLC is one of the leading producers of polymers and high-performance plastics in North America and is part of the global Bayer MaterialScience business with approximately 14,300 employees at 30 production sites around the world and 2009 sales of 7.5 billion euros. The company manufactures high-tech polymer materials and develops innovative solutions for products used in many areas of daily life. The main segments served are the automotive, electrical and electronics, construction, medical, and sports and leisure industries. Sustainability is central to Bayer MaterialScience LLC's business and is based around the key areas of innovation, product stewardship, excellence in corporate management, social responsibility and respect for the environment.

For more information about Bayer MaterialScience LLC's UVA-curable coatings, call 412-777-3983, e-mail naftainfo@bayerbms.com or visit www.bayermaterialsciencenafta.com.

# # #

This website may contain forward-looking statements based on current assumptions and forecasts made by Bayer Group or subgroup management. Various known and unknown risks, uncertainties and other factors could lead to material differences between the actual future results, financial situation, development or performance of the company and the estimates given here. These factors include those discussed in Bayer's public reports which are available on the Bayer website at www.bayer.com. The company assumes no liability whatsoever to update these forward-looking statements or to conform them to future events or developments.

Media Contact(s)
Name:	Thomas E. Erdner
Phone:	412-777-5200
Company:	Bayer MaterialScience
Email:	thomas.erdner@bayerbms.com